Aquarium water buffers – aquarium water treatment equipment

Orders are processed and shipped during regular business hours (Monday through Friday 8:00 am to 5:00 pm EST, excluding holidays).

Save 20% on Couponable Items With Coupon Code

Mem20

Save 20% on Couponable Items

Save an extra 20% off your entire order with coupon code: Mem20
*May exclude certain brands.
**May not be combined with any other offer.
Code expires 5/28/13

Mem20

Shop for Aquarium Water Buffers

Showing Items 1 to 16 of 16

Malawi/Victoria Buffer 250 Gram

Seachem Malawi/Victoria Buffer (250 Gram) is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness, buffer capacity, and pH. For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salta.

Cichlid Buffer Max

The Cichlid Buffer Max - 8.4 oz recreates the natural pH and alkalinity (KH) of Lake Victoria, Malawi and Tanganyika for African cichlids originating from African rift lakes. Alkalinity is increased by a special blend of carbonates, bicarbonates and borates. 8.4 oz - Treats up to 890 gallons Maintains pH between 7.8 and 8.8

Superbuffer DKH

Kent Superbuffer-dKH is a specially formulated pH buffer and alkalinity or carbonate hardness (KH) builder, designed to adjust the pH of saltwater aquariums to the range of 8.0 to 8.3 and build the KH. Kent Marine Superbuffer-dKH is the finest buffer available for either fish only or reef type marine aquariums and is designed to mix clear with little or no cloudiness or precipitation. Will not flake on your corals as other competing products can! Compatible with and designed for use with Kalkwasser Mix, Concentrated Liquid Calcium, or Turbo-Calcium by Kent Marine.

Alkalin 8.3 Liquid KH Buffer

The Alkalin 8.3 Liquid KH buffer was specially formulated by a Marine Scientist. This liquid KH buffer is a highly effective alkalinity increasing solution (KH Buffer) helps to increase pH stability in an aquarium by raising the alkalinity. The Alkalin 8.3 Liquid KH Buffer provides a source of carbonates, which make up the majority by weight of aragonite, the mineral secreted by reef-building organisms as skeletal material.Continued addition raises pH until 8.3 is reached, at which point the pH remains unchanged and the alkalinity alone increases. This product is free of phosphate, silicate, and organic material.

7.5 pH Buffer Stabilizer

Ecological Laboratories 7.5 pH Buffer Stabilizer safely buffers pH levels and prevents wide pH swings. Features: 2 pH buffers for gentle effectiveness and 3 electrolytes to help maintain osmotic balance provides needed alkalinity for nitrification uniquely formulated to control fish toxicity which can come from overdosing not harmful for fish or plants

Marine Buffer

SeaChem Marine Buffer will safely raise marine pH to 8.3. It will not raise pH above 8.3 even if inadvertently overdosed. Marine Buffer is a blended product and is not just sodium bicarbonate or sodium carbonate, commonly sold as a substitute. Such products can raise pH to dangerous levels if not used properly.SeaChem Marine Buffer contains sodium, magnesium, calcium, strontium, and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate.Please note - product is sold by weight, not volume. Contents may settle in shipment.

Reef Buffer

Sea Chem Reef Buffer is intended primarily for use in a reef system where the maintenance of a pH of 8.3 is often difficult. When used as directed, Sea Chem Reef Buffer will raise the pH of your reef system to 8.3 without fear of accidentally overshooting the pH to a dangerous level. Reef Buffer will also raise carbonate alkalinity. Raises carbonate alkalinity Intended for reef systems Allows for greater pH stability Sea Chem Reef Buffer is a blended product and is not just sodium carbonate. Reef Builder should be used to raise alkalinity when pH is not a problem. Use Seachems MultiTest: Marine pH & Alkalinity to check pH and total alkalinity.

Pro Buffer DKH - 16 oz

Kent Marine Pro Buffer DKH is an enhanced Pro-Buffer dKH with Coralline Accelerator raises alkalinity or buffering capacity and works automatically to control pH in any marine aquarium. In addition, when used with any of our calcium additives, it encourages strong coralline algae growth. Each 16 oz. of Kent Marine Pro-Buffer dKH will treat 1,900 gallons or 7,200 litres.

Chloram X

Hikari Chloram X removes ammonia and chlorine while also destroying chloramine.

Alkaline Buffer - 250 gr

SeaChem Alkaline Buffer (250 Gram) is a non-phosphate buffer to raise pH and alkalinity (KH) and buffer with Acid Buffer. These buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem.SeaChem Alkaline Buffer raises pH and buffers between 7.2 and 8.5. It is gentle, safe, and enhances the freshwater environment.

Discus Buffer

SeaChem Discus Buffer helps to replicate the ideal Discus environment (low pH & low GH (General Hardness)). Discus Buffer will lower pH and keep it lowered. Discus Buffer also softens water by precipitating calcium and magnesium.Use SeaChem Discus Trace to restore the proper level of trace elements required by thriving, healthy Discus.Directions: Use 1 level teaspoon (7 g) for every 40-80 L (10-20 gallons) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH

Reef Builder

Sea Chem Reef Builder raises carbonate alkalinity without immediately impacting on pH. With long term use there will be a tendency to stabilize at pH 8.3. Carbonates and calcium are essential to all coral growth.If either becomes deficient, coral growth will cease, followed by a rapid decline in coral health. Used as directed, Sea Chem Reef Builder will not deplete calcium, magnesium, or strontium which usually tend to precipitate with increasing alkalinity.Sea Chem Reef Builder and Reef Buffer may be used together. Use Sea Chem Reef Builder to raise carbonate alkalinity without affecting pH. Use Reef Buffer to raise carbonate alkalinity and pH.500 g treats 32,000 L (8,000 gallons). Use 3 grams per 40 gallons twice a week and check alkalinity every 2 weeks and adjust amount or frequency accordingly.

Acid Buffer

SeaChem Acid Buffer is a non-phosphate buffer to lower pH and buffer with Alkaline Buffer. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem.SeaChem Acid Buffer lowers pH and buffers between 5.0 and 8.0 when used with Alkaline Buffer. As Acid Buffer lowers pH it converts carbonate alkalinity (KH) into available CO2. It may also be used to safely lower pH in marine water.

Nano Reef Parts A & B - 8 oz

The trend in reef aquarium keeping is gradually shifting from larger systems to more affordable mini or nano-reefs, able to be setup and maintained at a fraction of the cost of much larger systems yet just as rewarding and beautiful to observe. A smaller aquarium is not necessarily easier to maintain than a relatively large one, however; in fact, the smaller the aquarium is, the more fastidious the care of attention paid to stability of water parameters is required to be.Kent Marine Complete Nano Reef Parts A & B provide all the important major, minor, and trace elements in the proper ratios and balance them with a buffer to increase alkalinity and maintain a stable ph for the long-term care of all ornamental marine invertebrates and fish. Nano Reef Part A contain all necessary major, minor, and trace ions in the proper ratios to maintain proper water parameters in nano-reefs and other small reef systems.- Nano Reef Part B is an ionically-balanced buffer to Part A that increases alkalinity and maintains stable pH- Provides proper ratios of calcium, magnesium, and strontium for rapid formation of skeletal material in stony corals and calcium spicules in soft corals.- Enhanced iodine concentration to satisfy the needs of hermatypic corals and there allies.- Simplifies the maintenance of proper water chemistry in small aquaria by providing everything needed in two products- Free of phosphate and other undesirable substances.

6.5 pH Buffer

Ecological Laboratories 6.5 pH Buffer sets freshwater at a pH of 6.5. This can be used for tap water, tank water and change water. 8.8 oz treats 500 gallonsA scoop is enclosed for your convenience.

7.0 pH Buffer / Stabilizer for Fresh Water

Ecological Laboratories 7.0 pH Buffer contains a blend of four sodium and potassium salts to set freshwater at a pH of 7.0. It has been specifically designed for algae eaters, silver dollars, Loaches, Plecostomus fish, and most Tetras. The 7.0 pH Buffer also contains a scoop for your convenience. Use for tank water, tap water and water changes Ideal for freshwater aquriums 17.6 oz - (Treats over 1,000 Gallons) Note: pre-dissolve buffer in a small amount of bottled or dechlorinated tap water then introduce to your aquarium.

Next >

< Back

Aquarium water buffers – aquarium water treatment equipment at Linens 'n Things

Free Shipping

Save 20% on Couponable Items

Mem20

Shop for Aquarium Water Buffers

Malawi/Victoria Buffer 250 Gram

Cichlid Buffer Max

Superbuffer DKH

Alkalin 8.3 Liquid KH Buffer

7.5 pH Buffer Stabilizer

Marine Buffer

Reef Buffer

Pro Buffer DKH - 16 oz

Chloram X

Alkaline Buffer - 250 gr

Discus Buffer

Reef Builder

Acid Buffer

Nano Reef Parts A & B - 8 oz

6.5 pH Buffer

7.0 pH Buffer / Stabilizer for Fresh Water

Email Sign-Up

Contact

Promotions

Resources