Lewis Hyman Sonoma Natural Burnt Bamboo Roman Shade Window Blinds at Linens 'n Things

Description:

The warm breath of a tropical breeze playfully tickles the senses as this lush blind finishes the perfect room. Delicate strips of natural bamboo, joined by an intricate weave cord, provide the perfect blend of light and privacy. The natural variations in color keep the eye dancing in peaceful serenity. Created to gently fold into the classic Roman shade design, the Sonoma shade adds warmth to any room in your home. Six inch built-in valance completes the elegance of this lush shade. Light filtering provides privacy and energy-efficient insulation qualities.

• Dye lots vary on natural products therefore we cannot guarantee that the colors of blinds will be exact.

• Easily installed in minutes with all necessary hardware included.
• Each shade measures 1/2" less in width to allow for inside mount installation.

Product Measurements:

• 39" W x 64" L
• 48" W x 64" L
• 52" W x 64" L
• 60" W x 64" L
• 71" W x 64" L

Care Instructions:

• Clean with damp cloth and vacuum

To adjust the length of a Roman Shade:

• Lay shade stretched out on a flat surface
• Untie cords from the bottom rings on the back of the shade.
• Measure what it is you want the length to be. Add 4 inches to that (i.e., desired length is 40”, plus 4” = 44”).
• Put masking tape across the width of the blind; both front and back, along that desired length/4 inch mark (i.e. 44”).
• Cut along the bottom of the tape.
• Fold the blind up twice, or until it reaches the desired length.
• Use hot glue to seal the hem. (Note: if you do not have hot glue, use clear adhesive, such as liquid nails or a wood glue)
• Tie the strings (the ones that hang down the back of the blind) to the little rings.