Lewis Hyman Kona Natural Roman Shade Window Blinds at Linens 'n Things

Description:

Inviting relaxation and soothing cool breezes into your home, these natural shades, alternating bamboo slats and premium matchsticks, add a casual elegance to any decor. Softly filtering just the perfect amount of light while providing the privacy you seek, these shades have been designed in the classic Roman design and offer endless decorating options Six inch built-in valance completes the elegance of this lush shade. Light filtering provides privacy and energy-efficient insulation qualities.

• Dye lots vary on natural products therefore we cannot guarantee that the colors of blinds will be exact.
• Easily installed in minutes with all necessary hardware included. Made of hand selected bamboo.
• Each shade measures 1/2" less in width to allow for inside mount installation.

Product Measurements:

• 23" W x 72" L
• 27" W x 72" L
• 31" W x 72" L
• 35" W x 72" L
• 39" W x 64" L
• 48" W x 64" L
• 52" W x 64" L
• 60" W x 64" L
• 71" W x 64" L

Care Instructions:

• Clean with damp cloth and vacuum

To adjust the length of a Roman Shade:

• Lay shade stretched out on a flat surface
• Untie cords from the bottom rings on the back of the shade.
• Measure what it is you want the length to be. Add 4 inches to that (i.e., desired length is 40”, plus 4” = 44”).
• Put masking tape across the width of the blind; both front and back, along that desired length/4 inch mark (i.e. 44”).
• Cut along the bottom of the tape.
• Fold the blind up twice, or until it reaches the desired length.
• Use hot glue to seal the hem. (Note: if you do not have hot glue, use clear adhesive, such as liquid nails or a wood glue)
• Tie the strings (the ones that hang down the back of the blind) to the little rings.