Med-Lift Blowout Deals Blowout Deals

Orders are processed and shipped during regular business hours (Monday through Friday 8:00 am to 5:00 pm EST, excluding holidays).

Save 20% on Couponable Items With Coupon Code

Mem20

Save 20% on Couponable Items

Save an extra 20% off your entire order with coupon code: Mem20
*May exclude certain brands.
**May not be combined with any other offer.
Code expires 5/28/13

Mem20

Memorial Day
Blowout Deals

Med-Lift Blowout Deals

Showing Items 1 to 12 of 12


Med-Lift 1193-CA 1100 Three-Way Reclining Lift Chair
Upholstery: Cabo - Sage,Dimensions: Height: 41" - Maximum Depth: 69" - Minimum Depth: 41" - Seat Depth: 20" - Seat Height: 21" - Seat Width: 23" - Weight Capacity: 325lbs - Width: 31.5" - Weight: 147lbsChair Type: Arm Chairs,Upholstery: Fabric,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 300 LbsThree-Way Reclining Lift ChairThe #1193 features a three-way recline with a chaise pad and battery back-up system as a standard feature.Can accommodate a person 5'2" to 6'2" tallBackrest features a double horizontal stitch to offer additional comfort in the lumbar regionMagazine pocket on lower outer right-hand side of chairAdditional Dimensions:Backrest height from top of seat: 23"Height from floor to footrest when reclined: 21"Back of seat to footboard tip when reclined: 40"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are Grade 5All bolts go entirely through the wood; no lag screws are used to secure the mechanismMechanism is secured by special locking T-Nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks are used throughout the chair at all critical points for added strengthAn extra rail is used across the top of the seat back to ensure that the back stays straight and squareInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSeat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableThere is also a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosenThe back springs are 12 gauge, and are also tied together with special tie wire for more comfort and enduranceTo ensure that the seat springs do not cut into the bottom of the seat foam, a nova bond pad is usedThe fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best found in the industryFoam:Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure-reducingLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace todayLow volt quiet motorBattery back-up is a standard featureFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specificationsProduct usually leaves the warehouse in:2-3 DaysProduct will ship via: White Glove Delivery: Room of Choice

Med-Lift 1193-CA 1100 Three-Way Reclining Lift Chair

Upholstery: Cabo - Sage,Dimensions: Height: 41" - Maximum Depth: 69" - Minimum Depth: 41" - Seat Depth: 20" - Seat Height: 21" - Seat Width: 23" - Weight Capacity: 325lbs - Width: 31.5" - Weight: 147lbsChair Type: Arm Chairs,Upholstery: Fabric,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 300 LbsThree-Way Reclining Lift ChairThe #1193 features a three-way recline with a chaise pad and battery back-up system as a standard feature.Can accommodate a person 5'2" to 6'2" tallBackrest features a double horizontal stitch to offer additional comfort in the lumbar regionMagazine pocket on lower outer right-hand side of chairAdditional Dimensions:Backrest height from top of seat: 23"Height from floor to footrest when reclined: 21"Back of seat to footboard tip when reclined: 40"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are Grade 5All bolts go entirely through the wood; no lag screws are used to secure the mechanismMechanism is secured by special locking T-Nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks are used throughout the chair at all critical points for added strengthAn extra rail is used across the top of the seat back to ensure that the back stays straight and squareInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSeat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableThere is also a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosenThe back springs are 12 gauge, and are also tied together with special tie wire for more comfort and enduranceTo ensure that the seat springs do not cut into the bottom of the seat foam, a nova bond pad is usedThe fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best found in the industryFoam:Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure-reducingLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace todayLow volt quiet motorBattery back-up is a standard featureFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specificationsProduct usually leaves the warehouse in:2-3 DaysProduct will ship via: White Glove Delivery: Room of Choice


Med-Lift 1175-E Two-Way Reclining Lift Chair
Upholstery: Encounter - Blue,Dimensions: Width: 31.5" - Weight Capacity: 325lbs - Seat Height: 19" - Seat Depth: 19.5" - Minimum Depth: 41" - Maximum Depth: 60" - Height: 41.5" - Weight: 147lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 300 LbsTwo-Way Reclining Lift ChairThis is a new two-way reclining lift chair that features heat and two vibrators as a standard feature. This model features a more contemporary look with a waterfall backrest.Can accommodate a person ranging from 5'2" to 6'2" tallMagazine pocketAdditional Dimensions:Backrest height from top of seat: 25"Footrest to floor when reclined: 19"Back of seat to footrest tip when reclined: 37"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints glued and connected with steel fastenersUni-construction of seat-back assembly independently lab-tested for strength and durabilityGang nails used at all other critical joints or stress pointsAll bolts used are Grade 5 and go entirely through the woodNo lag screws used to secure the mechanismMechanism secured by special locking T-Nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws the strongest availableCorner blocks used at all critical points for added strengthExtra rail across the top of the seat back ensures that the back stays straight and squareInside:All seat springs used are 9 gauge Morley system no-sag springs tied together with tie wire to make every spring work together as a seat unitSeat springs correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame larger and thicker than most competitors' products, making the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosen12 gauge back springs tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFiber used in the backs is dustless, odorless, non-allergenic, conjugated fiber, the best found in the industryBacks retain their original shape while offering greater comfortFoam:Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10 - 15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure-reducingLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that lift chairs must endureMost stable base in the upright lifted position that is available in the marketplace todayLow volt quiet motorBattery back-upFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specificationsBefore any upholstery is placed on the frame, no fabric comes in direct contact with woodThe wood frame that might come in contact with fabric is surrounded by an extra layer of foam or micro-foam to ensure a long fabric lifeExtra padding makes the arms, arm fronts, bac

Med-Lift 1175-E Two-Way Reclining Lift Chair

Upholstery: Encounter - Blue,Dimensions: Width: 31.5" - Weight Capacity: 325lbs - Seat Height: 19" - Seat Depth: 19.5" - Minimum Depth: 41" - Maximum Depth: 60" - Height: 41.5" - Weight: 147lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 300 LbsTwo-Way Reclining Lift ChairThis is a new two-way reclining lift chair that features heat and two vibrators as a standard feature. This model features a more contemporary look with a waterfall backrest.Can accommodate a person ranging from 5'2" to 6'2" tallMagazine pocketAdditional Dimensions:Backrest height from top of seat: 25"Footrest to floor when reclined: 19"Back of seat to footrest tip when reclined: 37"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints glued and connected with steel fastenersUni-construction of seat-back assembly independently lab-tested for strength and durabilityGang nails used at all other critical joints or stress pointsAll bolts used are Grade 5 and go entirely through the woodNo lag screws used to secure the mechanismMechanism secured by special locking T-Nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws the strongest availableCorner blocks used at all critical points for added strengthExtra rail across the top of the seat back ensures that the back stays straight and squareInside:All seat springs used are 9 gauge Morley system no-sag springs tied together with tie wire to make every spring work together as a seat unitSeat springs correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame larger and thicker than most competitors' products, making the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosen12 gauge back springs tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFiber used in the backs is dustless, odorless, non-allergenic, conjugated fiber, the best found in the industryBacks retain their original shape while offering greater comfortFoam:Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10 - 15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure-reducingLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that lift chairs must endureMost stable base in the upright lifted position that is available in the marketplace todayLow volt quiet motorBattery back-upFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specificationsBefore any upholstery is placed on the frame, no fabric comes in direct contact with woodThe wood frame that might come in contact with fabric is surrounded by an extra layer of foam or micro-foam to ensure a long fabric lifeExtra padding makes the arms, arm fronts, bac


Med-Lift 1193-CA Three-Way Reclining Lift Chair
Upholstery: Cabo - Godiva,Dimensions: Height: 41" - Maximum Depth: 68" - Minimum Depth: 41" - Seat Depth: 20" - Seat Height: 21" - Seat Width: 23" - Weight Capacity: 325lbs - Width: 31.5" - Weight: 147lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 300 LbsThree-Way Reclining Lift ChairThe #1193 features a three-way recline with a chaise pad and battery back-up system as a standard feature.Can accommodate a person 5'2" to 6'2" tallBackrest features a double horizontal stitch to offer additional comfort in the lumbar regionMagazine pocket on lower outer right-hand side of chairAdditional Dimensions:Backrest height from top of seat: 23"Height from floor to footrest when reclined: 21"Back of seat to footboard tip when reclined: 40"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are Grade 5All bolts go entirely through the wood; no lag screws are used to secure the mechanismMechanism is secured by special locking T-Nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks are used throughout the chair at all critical points for added strengthAn extra rail is used across the top of the seat back to ensure that the back stays straight and squareInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSeat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableThere is also a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosenThe back springs are 12 gauge, and are also tied together with special tie wire for more comfort and enduranceTo ensure that the seat springs do not cut into the bottom of the seat foam, a nova bond pad is usedThe fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best found in the industryFoam:Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure-reducingLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace todayLow volt quiet motorBattery back-up is a standard featureFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specifications

Med-Lift 1193-CA Three-Way Reclining Lift Chair

Upholstery: Cabo - Godiva,Dimensions: Height: 41" - Maximum Depth: 68" - Minimum Depth: 41" - Seat Depth: 20" - Seat Height: 21" - Seat Width: 23" - Weight Capacity: 325lbs - Width: 31.5" - Weight: 147lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 300 LbsThree-Way Reclining Lift ChairThe #1193 features a three-way recline with a chaise pad and battery back-up system as a standard feature.Can accommodate a person 5'2" to 6'2" tallBackrest features a double horizontal stitch to offer additional comfort in the lumbar regionMagazine pocket on lower outer right-hand side of chairAdditional Dimensions:Backrest height from top of seat: 23"Height from floor to footrest when reclined: 21"Back of seat to footboard tip when reclined: 40"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are Grade 5All bolts go entirely through the wood; no lag screws are used to secure the mechanismMechanism is secured by special locking T-Nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks are used throughout the chair at all critical points for added strengthAn extra rail is used across the top of the seat back to ensure that the back stays straight and squareInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSeat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableThere is also a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosenThe back springs are 12 gauge, and are also tied together with special tie wire for more comfort and enduranceTo ensure that the seat springs do not cut into the bottom of the seat foam, a nova bond pad is usedThe fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best found in the industryFoam:Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure-reducingLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace todayLow volt quiet motorBattery back-up is a standard featureFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specifications


Med-Lift 2553T Three-Way Tall Reclining Lift Chair
Upholstery: Bromley - Havana,Dimensions: Width: 32" - Weight Capacity: 375lbs - Seat Width: 21" - Seat Height: 20.5" - Seat Depth: 22" - Minimum Depth: 44" - Maximum Depth: 73" - Height: 44" - Weight: 170lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 300 LbsThree-Way Reclining Lift ChairThis chair offers you the style and technology to complement the mobility that you are seeking. It features a button-tufted backrest and rolled armrests. This chair offers the same features as the regular #2553 chair; however, it is designed for a taller individual.Additional 2" in height of the backrestAdditional 2" in overall reclined lengthThree-way reclining feature makes it an attractive option for someone who wants the comfort of added recline as well as the lift feature enabling greater mobilityMagazine pocketArmrest and head coverBattery back-upAdditional Dimensions:Backrest height from top of seat: 27"Back of seat to end of footboard when reclined: 41"Chair Frame:All kiln-dried hardwood; all stress points are kiln-dried oakAll joints glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails used at all other critical joints or stress pointsAll bolts used are Grade 5 and go entirely through the woodNo lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks used throughout the chair at all critical points for added strengthExtra rail used across the top of the seat back to ensure that the back stays straight and squareFoam:Acella-Flex foam is used for padding and developed for use in better upholstered furnitureAcella-Flex foam is the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure-reducingInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitFive seat springs correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, making the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosen12 gauge back springs tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFiber used in backs is dustless, odorless, non-allergenic, conjugated fiber, the best found in the industryLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureMost stable base in the upright lifted position that is available in the marketplace todayLow volt quiet motorFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specifications

Med-Lift 2553T Three-Way Tall Reclining Lift Chair

Upholstery: Bromley - Havana,Dimensions: Width: 32" - Weight Capacity: 375lbs - Seat Width: 21" - Seat Height: 20.5" - Seat Depth: 22" - Minimum Depth: 44" - Maximum Depth: 73" - Height: 44" - Weight: 170lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 300 LbsThree-Way Reclining Lift ChairThis chair offers you the style and technology to complement the mobility that you are seeking. It features a button-tufted backrest and rolled armrests. This chair offers the same features as the regular #2553 chair; however, it is designed for a taller individual.Additional 2" in height of the backrestAdditional 2" in overall reclined lengthThree-way reclining feature makes it an attractive option for someone who wants the comfort of added recline as well as the lift feature enabling greater mobilityMagazine pocketArmrest and head coverBattery back-upAdditional Dimensions:Backrest height from top of seat: 27"Back of seat to end of footboard when reclined: 41"Chair Frame:All kiln-dried hardwood; all stress points are kiln-dried oakAll joints glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails used at all other critical joints or stress pointsAll bolts used are Grade 5 and go entirely through the woodNo lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks used throughout the chair at all critical points for added strengthExtra rail used across the top of the seat back to ensure that the back stays straight and squareFoam:Acella-Flex foam is used for padding and developed for use in better upholstered furnitureAcella-Flex foam is the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure-reducingInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitFive seat springs correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, making the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosen12 gauge back springs tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFiber used in backs is dustless, odorless, non-allergenic, conjugated fiber, the best found in the industryLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureMost stable base in the upright lifted position that is available in the marketplace todayLow volt quiet motorFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specifications


Med-Lift 3653 Three-Way Reclining Lift Chair
Upholstery: Stampede - Mocha,Dimensions: Width: 47.5" - Weight Capacity: 600lbs - Seat Width: 33" - Seat Height: 20" - Seat Depth: 21.5" - Seat Back Height: 31.5" - Minimum Depth: 37" - Maximum Depth: 72" - Height: 48.5" - Weight: 246lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Upholstery: Vinyl Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 600 LbsThree-Way Reclining Lift ChairThis chair comes standard with two extra heavy duty motors and an extra heavy duty lift mechanism. It features a split backrest design with extra high density fiber.Extra heavy duty 3-way recline mechanismSpecial high density Acella-Flex foam seat polyAll steel seat spring box frame with heavy duty Morley spring systemExtra heavy duty d-arc spring in backExtra padding on armsTwo low-volt heavy duty motors with 1,000 lbs. of thrustSuper reinforced hardwood frameMagazine pocket on lower, outer right-hand sideArmrest and head coversAdditional Dimensions:Backrest height to top of seat: 31.5"Footrest to floor when reclined: 20.5"Back of seat to tip of footrest: 43"Height of armrest from top of seat: 7"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are high quality Grade 5All bolts go entirely through the wood; no lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableInside:All seat springs used are 8 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSeat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosenExtra heavy duty d-arc back springs are tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFoam:Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis model also features an extra 1.5" added to the thickness of the foam for extra supportThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace todayFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specificationsFiber used in back is dustless, odorless, non-allergenic conjugated fiber, the best found in the industry

Med-Lift 3653 Three-Way Reclining Lift Chair

Upholstery: Stampede - Mocha,Dimensions: Width: 47.5" - Weight Capacity: 600lbs - Seat Width: 33" - Seat Height: 20" - Seat Depth: 21.5" - Seat Back Height: 31.5" - Minimum Depth: 37" - Maximum Depth: 72" - Height: 48.5" - Weight: 246lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Upholstery: Vinyl Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 600 LbsThree-Way Reclining Lift ChairThis chair comes standard with two extra heavy duty motors and an extra heavy duty lift mechanism. It features a split backrest design with extra high density fiber.Extra heavy duty 3-way recline mechanismSpecial high density Acella-Flex foam seat polyAll steel seat spring box frame with heavy duty Morley spring systemExtra heavy duty d-arc spring in backExtra padding on armsTwo low-volt heavy duty motors with 1,000 lbs. of thrustSuper reinforced hardwood frameMagazine pocket on lower, outer right-hand sideArmrest and head coversAdditional Dimensions:Backrest height to top of seat: 31.5"Footrest to floor when reclined: 20.5"Back of seat to tip of footrest: 43"Height of armrest from top of seat: 7"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are high quality Grade 5All bolts go entirely through the wood; no lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableInside:All seat springs used are 8 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSeat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosenExtra heavy duty d-arc back springs are tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFoam:Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis model also features an extra 1.5" added to the thickness of the foam for extra supportThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace todayFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specificationsFiber used in back is dustless, odorless, non-allergenic conjugated fiber, the best found in the industry


Med-Lift 5053 Three-Way Reclining Lift Chair
Upholstery: Cabo - Sage,Dimensions: Width: 33" - Weight Capacity: 375lbs - Seat Width: 21" - Seat Height: 19" - Seat Depth: 21" - Seat Back Height: 28" - Minimum Depth: 44" - Maximum Depth: 72" - Height: 42" - Weight: 196lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 300 LbsThree-Way Reclining Lift ChairThe Three-Way Reclining Lift Chair features a waterfall, pillow-back style backrest. It is designed to enable you to go from a standing position to a sitting position to a reclined position with the touch of a fingertip.Waterfall fiber-filled back has zipper pillows that allow you to adjust the firmness and feel of each pillow for a more comfortable feel on your backDesigned to accommodate a person ranging from 5'2" to 6'2" tallChaise padMagazine pocket on lower right-hand outer sideHeadrest and arm coversBattery back-up systemAdditional Dimensions:Height of armrest to top of seat: 5.5"Height of backrest from top of seat: 28"Back of seat to tip of ottoman when reclined: 42"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are high quality Grade 5All bolts go entirely through the wood; no lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks are used throughout the chair at all critical points for added strengthExtra rail across the top of the seat back ensures that the back stays straight and squareInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSeat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosen12 gauge back springs are tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFiber used in backs is a dustless, odorless, non-allergenic, conjugated fiber, the best found in the industryBacks retain their original shape while also offering greater comfortFoam:Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure-reducingLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace todayLow volt quiet motorFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammability

Med-Lift 5053 Three-Way Reclining Lift Chair

Upholstery: Cabo - Sage,Dimensions: Width: 33" - Weight Capacity: 375lbs - Seat Width: 21" - Seat Height: 19" - Seat Depth: 21" - Seat Back Height: 28" - Minimum Depth: 44" - Maximum Depth: 72" - Height: 42" - Weight: 196lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 300 LbsThree-Way Reclining Lift ChairThe Three-Way Reclining Lift Chair features a waterfall, pillow-back style backrest. It is designed to enable you to go from a standing position to a sitting position to a reclined position with the touch of a fingertip.Waterfall fiber-filled back has zipper pillows that allow you to adjust the firmness and feel of each pillow for a more comfortable feel on your backDesigned to accommodate a person ranging from 5'2" to 6'2" tallChaise padMagazine pocket on lower right-hand outer sideHeadrest and arm coversBattery back-up systemAdditional Dimensions:Height of armrest to top of seat: 5.5"Height of backrest from top of seat: 28"Back of seat to tip of ottoman when reclined: 42"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are high quality Grade 5All bolts go entirely through the wood; no lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks are used throughout the chair at all critical points for added strengthExtra rail across the top of the seat back ensures that the back stays straight and squareInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSeat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosen12 gauge back springs are tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFiber used in backs is a dustless, odorless, non-allergenic, conjugated fiber, the best found in the industryBacks retain their original shape while also offering greater comfortFoam:Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure-reducingLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace todayLow volt quiet motorFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammability


Med-Lift 5200 Petite Wall-a-Way Reclining Lift Chair
Upholstery: Vista - Earth,Dimensions: Width: 34" - Weight Capacity: 275lbs - Seat Width: 17" - Seat Height: 19" - Seat Depth: 21" - Seat Back Height: 23" - Minimum Depth: 34" - Maximum Depth: 65" - Height: 42" - Weight: 145lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 200 LbsPetite Wall-a-Way Reclining Lift ChairThe Petite Wall-a-Way is geared towards a more petite person who is looking for a unit that can offer a more modern design in a reclining chair.Can be placed within 3" of the wall when in the reclined positionAttractive over-stuffed backrest with tapered horizontal stitch in mid-section of back for added stylingBattery back-up systemVelcro outside backAdditional Dimensions:Armrest height from top of seat: 7"Backrest height from top of seat: 23"Back of seat to tip of footrest when reclined: 40"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are high quality Grade 5All bolts go entirely through the wood; no lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks are used throughout the chair at all critical points for added strengthInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSeat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosen6 seat springs12 gauge back springs are tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFiber used in back is a dustless, odorless, non-allergenic, conjugated fiberFoam:Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis model also features an extra 1.5" added to the thickness of the foam for extra supportThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure-reducingLift base:Super Sagless lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace todaySuper quiet low volt motorFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specifications

Med-Lift 5200 Petite Wall-a-Way Reclining Lift Chair

Upholstery: Vista - Earth,Dimensions: Width: 34" - Weight Capacity: 275lbs - Seat Width: 17" - Seat Height: 19" - Seat Depth: 21" - Seat Back Height: 23" - Minimum Depth: 34" - Maximum Depth: 65" - Height: 42" - Weight: 145lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 200 LbsPetite Wall-a-Way Reclining Lift ChairThe Petite Wall-a-Way is geared towards a more petite person who is looking for a unit that can offer a more modern design in a reclining chair.Can be placed within 3" of the wall when in the reclined positionAttractive over-stuffed backrest with tapered horizontal stitch in mid-section of back for added stylingBattery back-up systemVelcro outside backAdditional Dimensions:Armrest height from top of seat: 7"Backrest height from top of seat: 23"Back of seat to tip of footrest when reclined: 40"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are high quality Grade 5All bolts go entirely through the wood; no lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks are used throughout the chair at all critical points for added strengthInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSeat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosen6 seat springs12 gauge back springs are tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFiber used in back is a dustless, odorless, non-allergenic, conjugated fiberFoam:Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis model also features an extra 1.5" added to the thickness of the foam for extra supportThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure-reducingLift base:Super Sagless lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace todaySuper quiet low volt motorFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specifications


Med-Lift 5255 Sleeper/Reclining Lift Chair
Upholstery: Vista - Earth,Dimensions: Width: 34" - Weight Capacity: 275lbs - Seat Width: 17" - Seat Height: 19" - Seat Depth: 21" - Seat Back Height: 23" - Minimum Depth: 34" - Maximum Depth: 70" - Height: 42" - Weight: 147lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 200 LbsSleeper/Reclining Lift ChairThe Petite Full Sleeper/Reclining lift chair is geared towards a more petite person who is looking for a unit that can offer a more contemporary design in a reclining lift chair. It can fully recline into a sleeping position, a T.V. position, and a reclining position.TV position and sleeping positions with the use of only one motorVelcro outside backBattery back-up systemAdditional Dimensions:Backrest height from top of seat: 23"Armrest height from seat: 7"Back of seat to tip of footrest when reclined: 40"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are high quality Grade 5All bolts go entirely through the wood; no lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks are used throughout the chair at all critical points for added strengthExtra rail across the top of the seat back ensures that the back stays straight and squareInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSeat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosen6 seat springs12 gauge back springs are tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFiber used in backs is a dustless, odorless, non-allergenic, conjugated fiberFoam:Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure-reducingLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace todayLow volt quiet motorFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specifications

Med-Lift 5255 Sleeper/Reclining Lift Chair

Upholstery: Vista - Earth,Dimensions: Width: 34" - Weight Capacity: 275lbs - Seat Width: 17" - Seat Height: 19" - Seat Depth: 21" - Seat Back Height: 23" - Minimum Depth: 34" - Maximum Depth: 70" - Height: 42" - Weight: 147lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 200 LbsSleeper/Reclining Lift ChairThe Petite Full Sleeper/Reclining lift chair is geared towards a more petite person who is looking for a unit that can offer a more contemporary design in a reclining lift chair. It can fully recline into a sleeping position, a T.V. position, and a reclining position.TV position and sleeping positions with the use of only one motorVelcro outside backBattery back-up systemAdditional Dimensions:Backrest height from top of seat: 23"Armrest height from seat: 7"Back of seat to tip of footrest when reclined: 40"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are high quality Grade 5All bolts go entirely through the wood; no lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks are used throughout the chair at all critical points for added strengthExtra rail across the top of the seat back ensures that the back stays straight and squareInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSeat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosen6 seat springs12 gauge back springs are tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFiber used in backs is a dustless, odorless, non-allergenic, conjugated fiberFoam:Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure-reducingLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace todayLow volt quiet motorFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specifications


Med-Lift 5300-VS Wall-a-Way Reclining Lift Chair
Upholstery: Vista - Saddle,Dimensions: Width: 36" - Weight Capacity: 275lbs - Seat Width: 17" - Seat Height: 19" - Seat Depth: 21" - Seat Back Height: 23" - Minimum Depth: 35" - Maximum Depth: 65" - Height: 43" - Weight: 147lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 200 LbsWall-a-Way Reclining Lift ChairThe Wall-a-Way Reclining Lift Chair is designed to be placed within 3" of the wall. It features an attractive waterfall pillowback styling for a more contemporary look.Geared towards an individual 5'3" to 5'9"Offers all of the features of a reclining lift chair but only needs 3" from the wallOffers the TV position as one of the positions available, all with the use of one motorThis chair is designed for the smaller individual, but it is not a petite chair; this is a "mid-sized" chairChaise padBattery back-upVelcro outside backAdditional Dimensions:Backrest height from top of seat: 23"Armrest height: 7"Back of seat to tip of footrest when fully reclined: 40"Footrest to floor when reclined: 21"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are high quality Grade 5All bolts go entirely through the wood; no lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks are used throughout the chair at all critical points for added strengthExtra rail across the top of the seat back ensures that the back stays straight and squareFoam:Acella-Flex foam is closest to a "perfect seating configuration" available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSix seat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosen12 gauge back springs are tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFabric:Fiber used in backs is a dustless, odorless, non-allergenic conjugated fiber, the best available in the industryBacks retain their original shape while giving greater comfortAll fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specificationsLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace today

Med-Lift 5300-VS Wall-a-Way Reclining Lift Chair

Upholstery: Vista - Saddle,Dimensions: Width: 36" - Weight Capacity: 275lbs - Seat Width: 17" - Seat Height: 19" - Seat Depth: 21" - Seat Back Height: 23" - Minimum Depth: 35" - Maximum Depth: 65" - Height: 43" - Weight: 147lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 200 LbsWall-a-Way Reclining Lift ChairThe Wall-a-Way Reclining Lift Chair is designed to be placed within 3" of the wall. It features an attractive waterfall pillowback styling for a more contemporary look.Geared towards an individual 5'3" to 5'9"Offers all of the features of a reclining lift chair but only needs 3" from the wallOffers the TV position as one of the positions available, all with the use of one motorThis chair is designed for the smaller individual, but it is not a petite chair; this is a "mid-sized" chairChaise padBattery back-upVelcro outside backAdditional Dimensions:Backrest height from top of seat: 23"Armrest height: 7"Back of seat to tip of footrest when fully reclined: 40"Footrest to floor when reclined: 21"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are high quality Grade 5All bolts go entirely through the wood; no lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks are used throughout the chair at all critical points for added strengthExtra rail across the top of the seat back ensures that the back stays straight and squareFoam:Acella-Flex foam is closest to a "perfect seating configuration" available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSix seat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosen12 gauge back springs are tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFabric:Fiber used in backs is a dustless, odorless, non-allergenic conjugated fiber, the best available in the industryBacks retain their original shape while giving greater comfortAll fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specificationsLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace today


Med-Lift 5555P Petite Sleeper/Reclining Lift Chair
Upholstery: Stampede - Mocha,Dimensions: Width: 33.5" - Weight Capacity: 375lbs - Seat Width: 19.5" - Seat Height: 19" - Seat Depth: 18" - Seat Back Height: 23.5" - Minimum Depth: 33" - Maximum Depth: 71" - Height: 40" - Weight: 147lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 300 LbsPetite Sleeper/Reclining Lift ChairThis chair has all the same specifications as the larger size, but designed to fit the needs of a smaller individual. It features many varied positions, and is capable of independently operating either the footrest position or the backrest. It can be put into a fully reclining "sleeping" position as well.This is not a Wall Hugger unitMagazine pocketChaise padArmrest and head coversBattery back-up systemTwo Okin super quiet motors that independently operate either the back or footrestAdditional Dimensions:Height of backrest from top of seat: 23.5"Top of armrest from top of seat: 5.5"Chair Frame:All kiln-dried hardwood; all stress points are kiln-dried oakAll joints glued and connected with steel fastenersUni-construction of seat-back assembly independently lab-tested for strength and durabilityGang nails used at all other critical joints or stress pointsAll bolts used are high quality Grade 5 and go entirely through the woodNo lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks used throughout the chair at all critical points for added strengthExtra rail across the top of the seat back ensures that the back stays straight and squareFoam:Acella-Flex foam offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure reducingInside:All seat springs used are 9 gauge Morley system no-sag springs tied together with tie wire to make every spring work together as a seat unitFive seat springs correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, making the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosen12 gauge back springs tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure they meet correct specificationsFiber used in backs is dustless, odorless, non-allergenic conjugated fiber, the best available in the industryBacks retain their original shape, giving greater comfortExtra padding used on any portion of the wood frame that comes in direct contact with fabricFront arm also has extra foam paddingWood frame surrounded by an extra layer of foam or microfoam to ensure long fabric lifeExtra padding makes the arms, backs, front arms, etc. feel softer and more plushLift base:Super Sag-less lift base (made in t

Med-Lift 5555P Petite Sleeper/Reclining Lift Chair

Upholstery: Stampede - Mocha,Dimensions: Width: 33.5" - Weight Capacity: 375lbs - Seat Width: 19.5" - Seat Height: 19" - Seat Depth: 18" - Seat Back Height: 23.5" - Minimum Depth: 33" - Maximum Depth: 71" - Height: 40" - Weight: 147lbsChair Type: Arm Chairs,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 300 LbsPetite Sleeper/Reclining Lift ChairThis chair has all the same specifications as the larger size, but designed to fit the needs of a smaller individual. It features many varied positions, and is capable of independently operating either the footrest position or the backrest. It can be put into a fully reclining "sleeping" position as well.This is not a Wall Hugger unitMagazine pocketChaise padArmrest and head coversBattery back-up systemTwo Okin super quiet motors that independently operate either the back or footrestAdditional Dimensions:Height of backrest from top of seat: 23.5"Top of armrest from top of seat: 5.5"Chair Frame:All kiln-dried hardwood; all stress points are kiln-dried oakAll joints glued and connected with steel fastenersUni-construction of seat-back assembly independently lab-tested for strength and durabilityGang nails used at all other critical joints or stress pointsAll bolts used are high quality Grade 5 and go entirely through the woodNo lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks used throughout the chair at all critical points for added strengthExtra rail across the top of the seat back ensures that the back stays straight and squareFoam:Acella-Flex foam offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure reducingInside:All seat springs used are 9 gauge Morley system no-sag springs tied together with tie wire to make every spring work together as a seat unitFive seat springs correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, making the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosen12 gauge back springs tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure they meet correct specificationsFiber used in backs is dustless, odorless, non-allergenic conjugated fiber, the best available in the industryBacks retain their original shape, giving greater comfortExtra padding used on any portion of the wood frame that comes in direct contact with fabricFront arm also has extra foam paddingWood frame surrounded by an extra layer of foam or microfoam to ensure long fabric lifeExtra padding makes the arms, backs, front arms, etc. feel softer and more plushLift base:Super Sag-less lift base (made in t


Med-Lift 5600 Wall-a-Way Reclining Lift Chair
Upholstery: Stampede - Chocolate,Dimensions: Width: 36" - Weight Capacity: 375lbs - Seat Width: 24" - Seat Height: 21" - Seat Depth: 21" - Seat Back Height: 28" - Minimum Depth: 38" - Maximum Depth: 69" - Height: 45" - Weight: 195lbsChair Type: Arm Chairs,Upholstery: Bonded Leather,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 300 LbsWall-a-Way Reclining Lift ChairThis Wall-a-Way Reclining Lift Chair can be placed as close as 3" from the wall and still be able to fully recline. An added feature that this chair offers is the open arm compartment on both armrests that allows for storage, cupholder, etc. There is also a fold-out table.T.V. position allows for greater comfort while enjoying watching movies, etc.Top of the lineTwo battery back-up systemChaise padHeavy duty low-volt super quiet motorAdditional Dimensions:Height of footrest to floor when fully reclined: 20"Back of seat to tip of footrest: 42"Top of armrest from top of seat: 7.5"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are high quality Grade 5All bolts go entirely through the woodNo lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks are used throughout the chair at all critical points for added strengthExtra rail across the top of the seat back ensures that the back stays straight and squareInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSeat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosenFour 12 gauge back springs are tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFiber used in backs is dustless, odorless, non-allergenic conjugated fiberLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace todayFoam:Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure reducingFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specifications

Med-Lift 5600 Wall-a-Way Reclining Lift Chair

Upholstery: Stampede - Chocolate,Dimensions: Width: 36" - Weight Capacity: 375lbs - Seat Width: 24" - Seat Height: 21" - Seat Depth: 21" - Seat Back Height: 28" - Minimum Depth: 38" - Maximum Depth: 69" - Height: 45" - Weight: 195lbsChair Type: Arm Chairs,Upholstery: Bonded Leather,Upholstery: Fabric Upholstery,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 300 LbsWall-a-Way Reclining Lift ChairThis Wall-a-Way Reclining Lift Chair can be placed as close as 3" from the wall and still be able to fully recline. An added feature that this chair offers is the open arm compartment on both armrests that allows for storage, cupholder, etc. There is also a fold-out table.T.V. position allows for greater comfort while enjoying watching movies, etc.Top of the lineTwo battery back-up systemChaise padHeavy duty low-volt super quiet motorAdditional Dimensions:Height of footrest to floor when fully reclined: 20"Back of seat to tip of footrest: 42"Top of armrest from top of seat: 7.5"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are high quality Grade 5All bolts go entirely through the woodNo lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks are used throughout the chair at all critical points for added strengthExtra rail across the top of the seat back ensures that the back stays straight and squareInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSeat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosenFour 12 gauge back springs are tied together with special tie wire for more comfort and enduranceNova bond pad ensures that the seat springs do not cut into the bottom of the seat foamFiber used in backs is dustless, odorless, non-allergenic conjugated fiberLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace todayFoam:Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure reducingFabric:All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammabilityIndependent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specifications


Med-Lift 5955 Sleeper/Reclining Lift Chair
Upholstery: Buffalino-Straw Ultra,Dimensions: Width: 40.5" - Weight Capacity: 375lbs - Seat Width: 20.5" - Seat Height: 20" - Seat Depth: 20" - Seat Back Height: 28.5" - Minimum Depth: 38" - Maximum Depth: 74" - Height: 46" - Weight: 195lbsChair Type: Arm Chairs,Upholstery: Bonded Leather,Upholstery: Fabric Upholstery,Upholstery: Faux Leather,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 300 LbsSleeper/Reclining Lift ChairThe #5955 Full Sleeper/Reclining Lift Chair is a top of the line unit. It features an over-stuffed backrest with over-stuffed, pillow-top arms. The seat is contoured to offer the most ultimate comfort in seating, no matter what position you are in.Includes the ever-popular TV viewing position and multiple positioning for added comfortChaise padBattery back-upSuper quiet low volt Okin motorFiber-filled overstuffed arms and backrestAdditional Dimensions:Armrest height: 8" from top of seatBackrest height from top of seat: 28.5"Back of seat to tip of footrest when reclined: 37.5"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are high quality Grade 5All bolts go entirely through the woodNo lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks are used throughout the chair at all critical points for added strengthExtra rail across the top of the seat back ensures that the back stays straight and squareFoam:Acella-Flex foam offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure-reducingInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSeat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosen12 gauge back springs are tied together with special tie wire for more comfort and enduranceNova bond pad, not scrap material or thin bagging material, ensures that the seat springs do not cut into the bottom of the seat foamFiber:Fiber used is dustless, odorless, non-allergenic conjugated fiber, the best found in the industryThis fiber feature makes the backs retain their original shape and gives you greater comfortLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace today

Med-Lift 5955 Sleeper/Reclining Lift Chair

Upholstery: Buffalino-Straw Ultra,Dimensions: Width: 40.5" - Weight Capacity: 375lbs - Seat Width: 20.5" - Seat Height: 20" - Seat Depth: 20" - Seat Back Height: 28.5" - Minimum Depth: 38" - Maximum Depth: 74" - Height: 46" - Weight: 195lbsChair Type: Arm Chairs,Upholstery: Bonded Leather,Upholstery: Fabric Upholstery,Upholstery: Faux Leather,Chair Movement: Stationary,Chair Function: Lift Recliner,Lift Chair Weight Capacity: Up to 300 LbsSleeper/Reclining Lift ChairThe #5955 Full Sleeper/Reclining Lift Chair is a top of the line unit. It features an over-stuffed backrest with over-stuffed, pillow-top arms. The seat is contoured to offer the most ultimate comfort in seating, no matter what position you are in.Includes the ever-popular TV viewing position and multiple positioning for added comfortChaise padBattery back-upSuper quiet low volt Okin motorFiber-filled overstuffed arms and backrestAdditional Dimensions:Armrest height: 8" from top of seatBackrest height from top of seat: 28.5"Back of seat to tip of footrest when reclined: 37.5"Chair Frame:Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oakAll joints are glued and connected with steel fastenersUni-construction of seat-back assembly is independently lab-tested for strength and durabilityGang nails are used at all other critical joints or stress pointsAll bolts used are high quality Grade 5All bolts go entirely through the woodNo lag screws are used to secure the mechanismMechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chairAll critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade qualityAll wood screws used are the strongest availableCorner blocks are used throughout the chair at all critical points for added strengthExtra rail across the top of the seat back ensures that the back stays straight and squareFoam:Acella-Flex foam offers the closest thing to a "perfect seating configuration" that is available in the industryAcella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. personThis foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few yearsSpecial break-in process before the foam is ever cut makes the foam feel good from the first use onSuper soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long lifeSeat foam is pressure-reducingInside:All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unitSeat springs are correctly spaced on the spring rails by a special clip rail machineFront seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durableRetainer rail secured by steel brads on top of the seat springs ensures that they do not loosen12 gauge back springs are tied together with special tie wire for more comfort and enduranceNova bond pad, not scrap material or thin bagging material, ensures that the seat springs do not cut into the bottom of the seat foamFiber:Fiber used is dustless, odorless, non-allergenic conjugated fiber, the best found in the industryThis fiber feature makes the backs retain their original shape and gives you greater comfortLift base:Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endureThe most stable base in the upright lifted position that is available in the marketplace today

Next >

< Back

Med-Lift Blowout Deals Blowout Deals at Linens 'n Things

Free Shipping

Save 20% on Couponable Items

Mem20

Med-Lift Blowout Deals

Med-Lift 1193-CA 1100 Three-Way Reclining Lift Chair

Med-Lift 1175-E Two-Way Reclining Lift Chair

Med-Lift 1193-CA Three-Way Reclining Lift Chair

Med-Lift 2553T Three-Way Tall Reclining Lift Chair

Med-Lift 3653 Three-Way Reclining Lift Chair

Med-Lift 5053 Three-Way Reclining Lift Chair

Med-Lift 5200 Petite Wall-a-Way Reclining Lift Chair

Med-Lift 5255 Sleeper/Reclining Lift Chair

Med-Lift 5300-VS Wall-a-Way Reclining Lift Chair

Med-Lift 5555P Petite Sleeper/Reclining Lift Chair

Med-Lift 5600 Wall-a-Way Reclining Lift Chair

Med-Lift 5955 Sleeper/Reclining Lift Chair

Email Sign-Up

Contact

Promotions

Resources